NISSAN SKYLINE GT-R - BNR34
PRODUCT LIST
| Product | Material | PART # | MSRP(yen) | REMARKS |
|---|---|---|---|---|
| FRONT BUMPER SPOILER | FRP | 8002W-N007 | discontinued | |
| AERO BONNET HOOD | FRP | 8006W-N006 | discontinued | Bonnet pins are contained. |
| EYE LINES | FRP | 8012W-N002 | discontinued | |
| SIDE STEPS | FRP | 8008W-N004 | discontinued | |
| REAR WING STAYS | FRP | 8004W-N004 | JPY110,000 | |
| REAR UNDER SPOILER | FRP | 8013W-N001 | discontinued |
FRONT BUMPER SPOILER
- This product was discontinued.
This bumper is made air space at the front bumper bigger than stock. It improves the cooling efficiency of the intercooler and radiator. It is considering for after parts (oil cooler,brake duct).
It has the duct of both sides big, and adds an air duct to both sides. It contributes to the stability in high-speed-running because optimal down force is gotten by large-size rip spoiler. It is possible to install in both V-spec front-defuser and front-bumper together.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 |
| Material | FRP(White gel coat) |
| Weight | -.-kg |
| Width | ---mm |
| Height | ---mm |
| Depth | ---mm |
| Front Duct | ---mm x ---mm |
| Brake Duct | Two places |
| Paint | No |
| Accessories | No |
| |
AERO BONNET HOOD
- This product was discontinued.
A runnig-wind is discharged efficiently and engine room is cooled efficiently because this bonnet has two air duct at the central of front, and it has two air duct at the right-left part on rear part. This bonnet is made from FRP material so it is very light. It can prevent vibration of bonnet at the time of a high-speed-running because it is the three hold type which uses both two bonnet pin and normal holder.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 |
| Material | FRP(Black gel coat) |
| Weight | 8.9kg |
| Width | 1460mm |
| Depth | 1260mm |
| Paint | No |
| Accessories | Bonnet hood pins |
| |
EYE LINES
- This product was discontinued.
Although eyeline is not functional parts, it covers upper part of headlight so that it can express the intrepid face. It can express individual style.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 NISSAN SKYLINE 25GT-t ER34 |
| Material | FRP(White gel coat) |
| Weight | 200g (by a set) |
| Width | 450mm |
| Height | 40mm |
| Paint | |
| Accessories | No |
| |
SIDE STEPS
- This product was discontinued.
A beautiful line is made in side face because it is designed with JUN Front Bumper Spoiler and JUN Rear Under spoiler together. It is design with volume and considered running-ability. It has the newly added air duct which can use as air duct for rear brake cooling.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 |
| Material | FRP(White gel coat) |
| Weight | 3.6kg (by a set) |
| Width | 1920mm |
| Height | 220mm |
| Paint | No |
| Accessories | No |
| |
WING STAYS
The wing position change into high position so that can get more down-force. This wing stay kit uses stock wing of BNR34. It can change of two position. (every 4 degree)
It is made from aluminum material so it is very light and strong. It is expressed the beauty of aluminum material.
- The holes to install this product use stock bolt holes.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 |
| Material | Aluminum |
| Weight | 1.8kg (by a set) |
| Width | 70mm |
| Height | 220mm (base+stay) |
| Depth | 234mm |
| Paint | No (colorless alumite) |
| Accessories | No |
| Note | Variable (2 steps/4 degrees) |
| |
REAR UNDER SOPILER
- This product was discontinued.
This rear under spoiler has sporty rear view because it is designed with JUN Front Bumper Spoiler and JUN Side Step together. It is possible to install in both V-spec rear defuser and rear under spoiler together. It makes a contribution to rectification effect.
| SPECIFICATIONS | |
|---|---|
| Vehicle | NISSAN SKYLINE GT-R BNR34 |
| Material | FRP |
| Weight | 1.8kg |
| Width | 1780mm |
| Height | 200mm |
| Paint | No (White gel coat) |
| Accessories | No |
| |
