HIGH LIFT CAMSHAFT

  • OUTLINE
  • POINTS
  • LINE-UP
NISSAN
TOYOTA
HONDA
MITSUBISHI
SUBARU
MAZDA
  • B6ZE
  •  
  •  
  •  
  •  
  •  
  •  
SUZUKI

DETAIL

SUBARU EJ20 (GC8/GDA)

  • HIGH LIFT CAMSHAFT
  • CAMSHAFT KIT STAGE 2
High Lift Camshafts for EJ20G/EJ20K/EJ205/EJ207
Spec (unit: mm)   PART # MSRP(yen) REMARKS
Duration Lift VC
IMPREZA WRX / GC8 Applied A-C (EJ20G-HLA)
64 (256) 9.0   IN 1004M-F004 JPY60,000 [REQUIRED]Cam lobe refuge machining
  EX 1004M-F104 JPY60,000
66 (264) 9.0   IN 1004M-F005 JPY60,000 [REQUIRED]Cam lobe refuge machining
  EX 1004M-F105 JPY60,000
68 (272) 9.0   IN 1004M-F006 JPY60,000 [REQUIRED]Cam lobe refuge machining
  EX 1004M-F106 JPY60,000
IMPREZA WRX / GC8 Applied D-E (EJ20K-SHIM)
64 (256) 9.0 0.20 IN 1004M-F001 JPY60,000  
0.25 EX 1004M-F101 JPY60,000
66 (264) 9.5 0.20 IN 1004M-F002 JPY60,000 [REQUIRED]Cam lobe refuge machining
[REQUIRED]Uprated valve spring
It is for Inner shim (under bucket) type.
0.25 EX 1004M-F102 JPY60,000
68 (272) 10.3 0.20 IN 1004M-F003 JPY60,000 [REQUIRED]Cam lobe refuge machining
[REQUIRED]Uprated valve spring
It is for Inner shim (under bucket) type.
0.25 EX 1004M-F103 JPY60,000
IMPREZA WRX / GC8 Applied F-G (EJ205/EJ207 w/o AVCS)
64 (256) 9.0 0.20 IN 1004M-F011 JPY60,000  
0.25 EX 1004M-F111 JPY60,000
66 (264) 9.5 0.20 IN 1004M-F012 JPY60,000 [REQUIRED]Uprated valve spring
0.25 EX 1004M-F112 JPY60,000
68 (272) 10.3 0.20 IN 1004M-F013 JPY60,000 [REQUIRED]Uprated valve spring
It is for Inner shim (under bucket) type.
0.25 EX 1004M-F113 JPY60,000
  • VC=Valve Clearance (cool conditions)
  • ‡ The price of this product is for a set of two INT or EXH camshafts.
  • ‡ The height of lift is the valve lift.
  • ‡1 All of these camshafts for EJ20G need to trim your cylinder head.
  • ‡2 Camshaft for EJ20K/EJ207 which is 9.5mm or higher lift of the profile needs to trim your cylinder head.
  • ‡ Regarding the profile which was not written '[REQUIRED]Cam lobe refuge machining' in the remarks, you may need to trim your cylinder head according to the conditions of your cylinder head so that a cam lob does not hit to the cylinder head.
  • ‡ カムノーズ逃げ加工とは、カム山がヘッドに干渉する場合にヘッド側を切削する加工です。弊社でも加工を承っています。
  • ‡3 This camshaft which has 9.5mm or higher lift needs to use uprated valve springs.
  • ‡4 The profile which was written 'for the Inner shim (under bucket) type' in the remarks cannot use on the outer shim (under bucket) type cylinder head.
  • ‡5 EJ207 camshafts don't work with the variable valve timing control system (AVCS).
  • ‡ We prepare the Camshaft Kit which contains valve springs and valve retainers. (except for EJ20G)
Camshaft Kit for EJ20K/EJ205/EJ207
Stage # Content PART # MSRP(yen) REMARKS
INT CAM EXH CAM Valve S/P Retainer
IMPREZA WRX / GC8 Applied D-E (EJ20K-SHIM)
Stage1 You can choose profile Ο N/A 1033M-F002 JPY140,000  
Stage2 You can choose profile Ο Type 1 1033M-F003 JPY190,000  
Stage2R You can choose profile Ο Type 2 1033M-F006 JPY202,000  
Option A set of cam slide sprockets (4 pc.) 1033M-F701 discontinued  
IMPREZA WRX / GC8 Applied F-G (EJ205/EJ207 w/o AVCS)
Stage1 You can choose profile Ο N/A 1033M-F004 JPY140,000  
Stage2 You can choose profile Ο Type 1 1033M-F005 JPY190,000  
Stage2R You can choose profile Ο Type 2 1033M-F007 JPY202,000  
Option A set of cam slide sprockets (4 pc.) 1033M-F702 discontinued  
  • ‡ You can choose the profile from placed in this page. You cannot choose the custom made camshaft.
  • ‡ We will choose the product which can be used for the profile which you chose, when enclosing the valve springs and valve retainers of each stage.
  • ‡ Option (cam slide sprocket) is a special price in case you purchase together with a camshaft kit. You cannot buy it alone.